Highly sensitive non-enzymatic electrochemical glucose biosensor based on PANI: ?12 Borophene
Küçük Resim Yok
Tarih
2021
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
SpringerLink
Erişim Hakkı
CC0 1.0 Universal
info:eu-repo/semantics/openAccess
info:eu-repo/semantics/openAccess
Özet
Glucose is one of the main clinical biomarkers which can lead to the micro/macrovascular complications of diabetes. Borophene nanosheets were prepared by ultrasonic sonication. Borophene nanosheets were obtained with ?12 phase crystalline structure. Then, randomly grown PANI: Borophene nanonetwork was prepared. Glucose sensing performance of Borophene and PANI: Borophene-based non-enzymatic electrochemical biosensors were investigated in detail with in a comparison of the prepared PANI-based biosensor. LOD and LOQ for PANI: ?12 Borophene-based electrochemical sensor are 0.5 mM and 1.7 mM and for PANI-based electrochemical sensor are 1.2 mM and 3.9 mM, respectively. It can be seen that the prepared PANI: ?12 Borophene-based electrochemical sensor demonstrates a good improvement over previous reports for glucose sensing using PANI. PANI: Borophene-based biosensor detected 1–12 mM glucose with the sensitivity of 96.93 ?AmM?1 cm?2 during 1 min cyclic voltammetry measurement. The results reveal that Borophene enhanced the glucose sensing sensitivity of PANI. PANI: Borophene-based biosensor has higher sensitivity and better stability.
Açıklama
Anahtar Kelimeler
Kaynak
Journal of Materials Science: Materials in Electronics
WoS Q Değeri
Q2
Scopus Q Değeri
Q2
Cilt
32
Sayı
Künye
Taşaltın, C., Ateş Türkmen, T., Taşaltın, N. ve Karakuş, S. (2021). Highly sensitive non-enzymatic electrochemical glucose biosensor based on PANI: ?12 Borophene. Journal of Materials Science: Materials in Electronics, SpringerLink. 32, s. 10750-10760.
